top of page

GROUND AND CHROME-PLATED BARS AND TUBES

OUR PRODUCTION

WHAT WE DO


Eurocromo grinds and chrome-plates steel bars and tubes. We also offer special grinding and chrome plating of stainless steel bars:
martensitic AISI 431 – 1.4057; austenitic AISI 303 – 1.4305, AISI 304 – 1.4301, AISI 316 – 1.4401;
duplex AISI 329 – 1.4460, AISI 329A – 1.4462.
On request, we also grind and chrome-plate stainless steel tubes.

 

Production range:

​

  • Ø 8 to Ø 19.05 mm in bar or tube lengths of 3000/3200 mm

  • Ø 20 to Ø 125 mm in lengths of 6000/7000 mm

  • Ø 127 to Ø 140 mm in commercial lengths, on request

Our products serve the pneumatics, hydraulics and industrial automation markets and manufacturers of components that must meet specific environmental regulations.

 

Subject to availability from stock, the minimum order quantity is 500/1000 kg or based on the minimum purchase lot of the material.

Bars and tubes are available in commercial lengths of 5-7 m.

GROUND AND CHROME-PLATED BARS
Bars in C45, 20MnV6 and 42CrMo4 steel grades.

Available grades:

 

  • BCC - UNI EN ISO 683 - C45 (similar to DIN Ck45 - SAE 1045) - Normalized carbon steel; induction hardened on request

 

  • B6C - 20MnV6 - Vanadium micro-alloyed steel with higher yield strength and improved weldability and toughness

 

  • BDC - UNI EN ISO 683 - 42CrMo4 (similar to SAE 4140) - Quenched and tempered medium-alloy steel for highly stressed mechanical parts; induction hardened on request

GROUND AND CHROME-PLATED TUBES
External grinding and chrome plating of tubes

Available types:

   

  • TSC - Cold-drawn seamless precision tubes for mechanical use, to EN 10305-1

    Delivery condition: normalized (+N) and/or stress relieved (+SR) - E355 +SR/N

 

  • T2C - Cold-drawn welded precision tubes for mechanical use, to EN 10305-2 (on request only)

    Delivery condition: normalized (+N) and/or stress relieved (+SR) - E355 +SR/N

 

  • T6C - Micro-alloyed steel for highly stressed mechanical parts (on request only)

    Delivery condition: E410 +SR, seamless to EN 10305-1

GROUND AND CHROME-PLATED STAINLESS STEEL BARS
High-quality ground and chrome-plated stainless steel bars

Processing of stainless steel bars such as:

  • BAC - AISI 431 Bon – 1.4057 - Martensitic stainless steel, hardenable, offers resistance to corrosion and fatigue superior to that of steels containing only chromium

  • BAC - AISI 303 – 1.4305 - Austenitic stainless steel, normally supplied solution annealed. Excellent toughness at low temperatures and good corrosion resistance in the absence of chlorides and reducing acids

  • BAC - AISI 304 – 1.4301 - Austenitic stainless steel, not hardenable by heat treatment, work-hardens by cold forming, improved machinability

  • BAC - AISI 316 – 1.4401 - Austenitic stainless steel used at high temperatures with good corrosion resistance towards various acids, salts, salt water and chemical reagents

  • BAC - AISI 329 – 1.4460 and AISI 329A – 1.4462 on request - Duplex stainless steel with excellent stress corrosion resistance and high yield strength

Produzione barre
Barre Inox
Tubi

TECHNICAL SPECIFICATIONS
The following technical specifications for geometry and chrome layer apply to all our chrome-plated bars and tubes.

CHROME LAYER THICKNESS
  • S: ≥ 15 microns (Ø8 ÷ 19.05)

  • L: ≥ 20 microns (Ø20÷ 125)

  • P: ≥ 40 microns (Ø40÷ 125)

  • PP: ≥ 50 micron (Ø40÷ 125) on request

CHROME LAYER HARDNESS
  • HV 0.1 850 ÷ 1150 - HRC 64 ÷ 75

STRUCTURE
  • Micro-cracked, > 15,000 micro-cracks/mm²

STRAIGHTNESS
  • Better than 0.5 mm/m

CORROSION RESISTANCE
  • Neutral salt spray test ≥ 150h according to ISO 9227

  • ISO 4540 rating: 9

TOLERANCES
  • ISO f7 as production standard

  • Other ISO tolerances on request

OVALITY
  • Half of the tolerance, grade 7

SURFACE ROUGHNESS
  • Ra: 0.05 ÷ 0.20 microns

  • Rz: 1.0 microns

  • Rmax: 1.0 microns

  • Rt: max 2.5 microns

Raw material control

The key point of our production is the purchase of the highest quality European raw materials from certified and time-tested suppliers.

This allows us to grind and chrome plate with confidence, offering customers the best technical, physical and surface properties available on the market.

Finishing and polishing

After chrome plating, every bar and tube is polished individually to deliver a hard chrome surface with rating 9 and the tolerance and roughness our customers require.

Preparatory grinding

The first operation is a dimensional and surface inspection of the material in the grinding department.

All material is inspected and measured before and during grinding to achieve the finished tolerance, roughness and surface required by our customers.

Control and testing

Final inspection of chrome-plated or ground-only material is carried out with the best manual and laser measuring technology on the market.

 

Hard chrome electroplating

Our core business is hard chrome electroplating of bars and tubes, with a standard minimum chrome layer of 15 to 20 µm and specific thicknesses on request.

 

Traditional tank electroplating process, optimized with state-of-the-art equipment and continuously improved.

Packaging and shipping

Our quality also extends to packaging: every bar or tube is packed individually before shipment or collection.

We can offer different types of packaging:

  • Individual extruded plastic sleeve

  • Individual cardboard tube

  • Customer-specific packaging

PRODUCTION CYCLE

The production cycle takes place in the following production phases

FOR MORE INFORMATION

Tel: +39 02 972 55 661

​

Fax: +39 02 972 59 264

​

​

OFFICE HOURS

Monday - Friday: 8:00 - 12:00

Monday - Friday: 13:00 - 17:00

WAREHOUSE HOURS

Monday - Friday: 8:00 - 11:30

Monday - Friday: 13:00 - 16:30

YEARS OF EXPERIENCE
OUR WORKS
HEAD OFFICE AND PLANT

Quality, flexibility, reliability and expertise at your service for all your needs in ground and chrome-plated bars and tubes, including stainless steel

- Ground Bars

- Chrome-Plated Bars

- Ground Tubes

- Chrome-Plated Tubes

- Ground and Chrome-Plated Stainless Steel Bars and Tubes

- Subcontract grinding and chrome plating of bars and tubes

Eurocromo S.r.l.

Via Dell'Artigianato 1

20010 Bernate Ticino (MI)

VAT: IT 08133700156

REA: 1217655 CCIAA MILANO MONZA BRIANZA LODI - Share capital: EUR 101,640
Tel.: +39 02 972 55 661

Fax: +39 02 972 59 264

  • Facebook Social Icon
© Copyright

2026 Eurocromo S.r.l.

bottom of page